| System Upgrade Options | ||
| Perc 4/DC raid controller PCI-E | $499 | |
| Remote Access Card, PowerEdge 1950 | $149 | |
| 36 gig 15K SAS 3.5" drive | $ 129 | |
| 73 gig 10K SAS3.5" drive | $ 179 | |
| 73 gig 15K SAS3.5" drive | $ 249 | |
| 146 gig 10K SAS 3.5" drive | $ out | |
| 146 gig 15K SAS3.5" drive | $ 399 | |
| 300 gig 10K SAS3.5" drive | $ 399 | |
| 400 gig 10K SAS 3.5" drive | $ 599 | |
| 300 gig 15K SAS 3.5" drive | $ 599 | |
| PC2-5300F | ||
| 512 MB | $ 39 | |
| 1 Gb | $ 59 | |
| 2 Gb | $ 119 | |
| 4 Gb | $ 399 | |
| Intel Pro-1000MT Dual port Network Card PCI-Express | $ 199 | |
| 4-Post
Rail Kit Combo Rapid/Versa |
$ 139 | |
| Redundant power supply | $ 129 | |
|
DELL PowerEdge Servers > Dell
PowerEdge 2900 |
|
Call
Toll Free: 1-888-712-0717 for custom estimates |
 |
| Price | Hard Drives |
Processor's) Speed in GHz |
Memory Gigs |
RAID | Backplane | Condition |
Power Supply |
| $5699 | 3 x 73 15k SAS |
Quad Core E5335 2.0 GHz 2 x 4 mb cache- 1333 FSB |
32 | Perc 5/i |
8 Drive 3.5" SAS or Sata |
Refurbished | Redundant |
|
|
PowerEdge 2900 | PowerEdge 2800 | |
| Processors |
dual core or quad core Intel 5050 2 x 2M 3.0GHz 667 MHz FSB Intel 5060 2 x 2M 3.2 GHz 1066 MHz FSB Intel 5080 2 x 2M 3.7 GHz 1066 MHz FSB Intel 5110 4M 1.6 GHz 1066 MHz FSB Intel 5130 4M 2.0 GHz 1333 MHz FSB Intel 5140 4M 2.3 GHz 1333 MHz FSB Intel 5150 4M 2.66 GHz 1333 MHz FSB Intel 5160 4M 3.0 GHz 1333 MHz FSB Intel E5310/L5310 1.6 Ghz 1066 Mhz FSB Intel E5320/L5320 1.86Ghz 1066 Mhz FSB Intel E5335 2 x 4M 2.0 Ghz 1333Mhz FSB Intel E5345 2 x 4M 2.33 Ghz 1333Mhz FSB Intel X5355 2 x 4M 2.66Ghz 1333Mhz FSB Intel X5365 2 x 4M 3.0Ghz 1333Mhz FSB Quad core Intel E5310/L5310 2 x 4M 1.6 Ghz 1066 Mhz FSB Intel E5320/L5320 2 x 4M 1.86Ghz 1066 Mhz FSB Intel E5335 2 x 4M 2.0 Ghz 1333Mhz FSB Intel E5345 2 x 4M 2.33 Ghz 1333Mhz FSB Intel X5355 2 x 4M 2.66Ghz 1333Mhz FSB Intel X5365 2 x 4M 3.0Ghz 1333Mhz FSB Quad core E54XX series 2 x 6 Meg cache Intel E5405 2 x 6 M 2.0 Ghz 1333Mhz FSB Intel E5410 2 x 6 M 2.33 Ghz 1333Mhz FSB Intel E5420 2 x 6 M 2.50 Ghz 1333Mhz FSB Intel E5440 2 x 6 M 2.83 Ghz 1333Mhz FSB Intel E5450 2 x 6 M 3.00 Ghz 1333Mhz FSB Intel E5460 2 x 6 M 3.16 Ghz 1333Mhz FSB |
Dual core 2.8 or 3.0 GHz 2 x 2 Meg cache Intel Pentium 4 Xeon - 1 or 2 Meg cache EMT 64, not pin compatible with the older Xeon chips. 2.8 thru 3.8 GHz |
|
| Hard drive bays | 8 x 3.5" SATA or SAS | 2 x Ultra 320 Scsi | |
| Ethernet controller | 2 x Broadcom Gigabit Ethernet | 2 x Gigabit Ethernet | |
| Raid controller | Dual Channel SAS - Perc 5/i |
Dual
Channel Ultra 320 - Perc 4e/Di Raid is now installed on the riser card |
|
| External I/O 64 bit card |
2 x PCI-X 1 x 64 bit 133 MHz 1 x 64 bit 100 MHz PCI-E is now optional (8 bit serial) using the Perc 4e/DC |
||
| PCI expansion slots | 2 | ||
| Tape backup option | External only | External only | |
| Motherboard | Intel 5000P | Intel 7520 | |
| Front side bus |
667, 1066, or 1333 MHz Dependent on CPU installed |
800 MHz | |
| Power Supplies - max hotswap redundant | 2 x 750 watt | 2 x 500 watt | |
| Memory Slots |
12 slots - DDR2 PC4300F or 5300F Registered ECC
Fully Buffered 48 Gigs Max ( 8 x 4 Gigs) 1333 Mhz FSB series cpu requires PC5300F all others use PC4200F or PC5300F |
6 - DDR-2 PC 3200 Registered ECC 12 Gigs Max ( 6 x 2 Gig) 12 Gigs requires use of single ranked DIMM's. (extremely expensive) Best upgrade 8 Gigs using 4 x 2 gig dual ranked DIMM |
|
|
Pros: Rail kits are a combination versa and rapid, one fits both rack types. New fully buffered memory type, the first serial mode memory for Dell servers Registered memory will not work. The memory is designated DDR2 4300F or 5300F. Hint - DDR2 4200R will not work! If there is a heat sink on the DIMM then it is probably the correct one. SATA drives ( Dell sells a max of 160 GB, 750, 1000 GB drives work) are now supported.. Cons: |
|||