
| System Upgrade Options | ||
| DRAC5 | $ 149 | |
| Perc 5/e Raid controller PCI-E | $ 299 | |
| Perc 6/i Raid controller PCI-E | $ 249 | |
| 36 gig 15K SAS 3.5" drive | $ 79 | |
| 73 gig 10K SAS3.5" drive | $ 89 | |
| 73 gig 15K SAS3.5" drive | $ 99 | |
| 146 gig 10K SAS 3.5" drive | $ 149 | |
| 146 gig 15K SAS3.5" drive | $ 169 | |
| 300 gig 10K SAS3.5" drive | $ 199 | |
| 450 gig 15K SAS 3.5" drive | $ 389 | |
| 300 gig 15K SAS 3.5" drive | $ 279 | |
| 73 gig 10K SAS 2.5" drive | $ 79 | |
| 73 gig 15K SAS 2.5" drive | $ 99 | |
| 146 gig 10K SAS 2.5" drive | $ 199 | |
| PC2-5300F | ||
| 512 MB | $ 29 | |
| 1 Gb | $ 49 | |
| 2 Gb | $ 89 | |
| 4 Gb | $ 169 | |
| 4-Post
Rail Kit Combo Rapid/Versa |
$ 89 | |
| Redundant power supply | $ 129 | |
|
DELL PowerEdge Servers > Dell PowerEdge 2950
SOLD OUT OF 2950 SYSTEMS |
|
Call Toll Free: 1-888-712-0717 for custom estimates |
![]() The PE 2950 shown above has a 1 x 6 backplane. Note there is no floppy installed. |
| Price | Hard Drives |
Processor's Speed in MHz |
Memory | RAID | Backplane | Condition | Power Supply |
| $7688 | 3 x 146k 3.5" SAS |
2 x Quad core X5470 2x6 Mb cache |
64 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $4277 | 300 x 3 15k 3.5" SAS |
2 x Quad core X5460 2x6 Mb cache |
32 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $4177 | 146 x 3 15k 3.5" SAS |
2 x Quad core E5450 2x6 Mb cache |
32 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $3669 | 146 x 6 15k 3.5" SAS |
2 x Quad core E5420 2x6 Mb cache |
32 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $4133 | 1 Tb x 6 7200rpm SAS |
2 x Quad Core E5405 2x6 Mb cache |
32 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $2576 | 73 x 3 15k 3.5" SAS |
2 x Quad Core E5405 2 x 6 Mb cache |
16 Gb | Perc 6/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $1720 | 73 x 3 10k 3.5" SAS |
2 x Dual Core 5130
4 mb cache |
4 Gb | Perc 5/i |
4 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $1829 | 73 x 4 10k 2.5" SAS |
2 x Quad Core E5310 2x4 Mb cache |
4 Gb | Perc 5/i |
8 Drive 2.5" Devices |
Refurbished 1 year Scsistuff |
Single |
| $1879t | 73 x 4 15k 2.5" SAS |
2 x Quad Core E5310 2x4 Mb cache |
4 Gb | Perc 5/i |
8 Drive 2.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| $2568 | 1 Tb x 4 7200rpm SATA II |
2 x Quad Core E5320 2x4 Mb cache |
16 Gb | Perc 5/i |
6 Drive 3.5" Devices |
Refurbished 1 year Scsistuff |
Redundant |
| PowerEdge 2950 | PowerEdge 2850 | |
| Processors |
Dual core Intel 5050 2 x 2M 3.0GHz 667 MHz FSB Intel 5060 2 x 2M 3.2 GHz 1066 MHz FSB Intel 5080 2 x 2M 3.7 GHz 1066 MHz FSB Intel 5110 4M 1.6 GHz 1066 MHz FSB Intel 5130 4M 2.0 GHz 1333 MHz FSB Intel 5140 4M 2.3 GHz 1333 MHz FSB Intel 5150 4M 2.66 GHz 1333 MHz FSB Intel 5160 4M 3.0 GHz 1333 MHz FSB Quad core E53XX series 2 x 4 Meg cache Intel E5310/L5310 2 x 4M 1.6 Ghz 1066 Mhz FSB Intel E5320/L5320 2 x 4M 1.86Ghz 1066 Mhz FSB Intel E5335 2 x 4M 2.0 Ghz 1333Mhz FSB Intel E5345 2 x 4M 2.33 Ghz 1333Mhz FSB Intel X5355 2 x 4M 2.66Ghz 1333Mhz FSB Intel X5365 2 x 4M 3.0Ghz 1333Mhz FSB Quad core E54XX series 2 x 6 Meg cache Intel E5405 2 x 6 M 2.0 Ghz 1333Mhz FSB Intel E5410 2 x 6 M 2.33 Ghz 1333Mhz FSB Intel E5420 2 x 6 M 2.50 Ghz 1333Mhz FSB Intel E5440 2 x 6 M 2.83 Ghz 1333Mhz FSB Intel E5450 2 x 6 M 3.00 Ghz 1333Mhz FSB Intel E5460 2 x 6 M 3.16 Ghz 1333Mhz FSB Intel E5460 2 x 6 M 3.33 Ghz 1333Mhz FSB |
Dual core 2.8 or 3.0 GHz 2 x 2 Meg cache Intel Pentium 4 Xeon - 1 or 2 Meg cache EMT 64, not pin compatible with the older Xeon chips. 2.8 thru 3.8 GHz |
|
Hard
drive bays - 3 backplane option |
6 x 3.5" SATA or SAS 4 x 3.5" SATA or SAS 8 x 2.5" SAS only |
6 |
| Ethernet controller | 2 x Gigabit Ethernet | 2 x Gigabit Ethernet |
| Raid controller |
Dual
Channel SAS RAID - Perc 5/i or Perc 6/i The raid controller is now installed above the hard drive cage and is attached to the left riser |
Dual Channel Ultra 320 |
| External I/O 64 bit card |
2 x PCI-X 1 x PCIe 8x or 2 x PCIe 8x 1 x PCIe 4x |
3 x PCI-X 1 x 64 bit 133 MHz 2 x 64 bit 100 MHz PCI-E is now optional (8 bit serial) using the Perc 4e/DC |
| PCIe or PCI-X expansion slots | 3 | 3 |
| Tape backup option | DAT 72 or RD1000 | DAT 72 only |
| Motherboard | Intel 5000P | Intel 7520 |
| Front side bus | 667, 1066, or 1333 MHz | 800 MHz |
| Power Supplies - max hot swap redundant | 2 x 750 watt | 2 x 700 watt |
| Memory Slots |
8 slots - DDR2 PC4300F or 5300F Registered ECC
Fully Buffered 64 Gb Max ( 8 x 8 Gb) |
6 - DDR2 PC3200 Registered ECC 12 Gb Max ( 6 x 2 Gig) 12 Gb requires use of single ranked DIMM's. (extremely expensive) Best upgrade 8 Gb using 4 x 2 gig dual ranked DIMM |
| Notes |
1. Chassis - backplanes are unique. If you select a 2.5" backplane you cannot switch to a 3.5" backplane. a. The 3.5" x 6 slot backplane is unable to mount a floppy drive. b. 3.5" x 4 and 3.5" x 6 backplanes are swappable. c. Drives are now SAS, think of SCSI using a serial interface. SAS requires a SAS backplane, they will not plug into a SATA backplane. d. You can use either SAS or SATA drives in the 3.5" backplane. 2. PCIe and PCIx riser cards are interchangeable 3. Memory - servers with the following cpu's ship with PC4200F memory. 5050, 5060, 5080, 5110, 5120 i.e. 667 MHz and 1066 MHz FSB. a. The FBDIMM shipping with the 2950 is a serial bit transfer DIMM as opposed the 2850 parallel bit transfer DIMM. 4. Rail kits are unique to the server. The rail kit is a combo versa/rapid rail. The 2850 or 2650 rail kits will not work. 5. Dual core cpu notes. The 5100 series processors support a 4MB cache which is dual core. Each core can use all or part of the 4MB cache. Hence it is no longer described as a 2 x 2M core cache. Think higher performance for database applications. Quad core cpus require a unique motherboard E54XX cpus require another unique motherboard - aint this great!!!! There are now three versions of the motherboard Series I - supports 51XX or 50XX series Xeons only Series II - supports 51XX, 50XX, E53XX series Xeons only Series III - supports 51XX, 50XX, E53XX, E54XX series Xeons only 6. The Perc 5/i or 6/i internal raid controller can support SAS or SATA. When using a SATA software raid array, initialization times are 2-4 times longer than SAS. Performance is slower, SATA drives cannot be accessed as quickly as SAS drives. You pay for what you get. If you want performance buy SAS. If you want the larger capacity use SATA and expect slower access and performance. 7. 2.5" SAS drives max capacity is now 146 Gb 10K. 8. CPU power draw is much reduced with the 5100 series cpu. 65 watts each versus the 90 watt draw on the current 2850 cpu's. Beware of the 5080 & 5060 cpu, 135 watts required per cpu!!! This dual cpu (5060) server will use $136 per year more in electricity than a 5100 series. (assumes .12 cents per kilowatt hour).
9. Performance is much enhanced over
the older 800 FSB Xeon. Performance even exceeds the AMD Athlon
series. |
|
No